bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing_replacing Trunk Wheel Housing Trim, Left|Page 2296 > < 3 RA Removing And Installing_replacing Luggage Compartment Floor Trim Panel
Page 1
background image

51 47 151

Removing and installing/replacing trunk
wheel housing trim, left

Remove and install flap in luggage compartment trim, left
and right,

refer to 51 47 172.

Version with ski bag:

Release expansion rivet (1).

Remove trunk wheel housing trim (2), lift over lashing eye (3) and
lift out of ski bag frame (4).

Installation:

First feed into ski bag frame (4).

Replacement only (version with ski bag):

Release plastic screw fitting (1) and detach trim panel
components (2) and (3).

Installation:

Plastic screw fitting (1) is only pressed together during
installation.

Version with ski bag:

Release expansion rivet (1).

Remove trunk wheel housing trim (2), lift over lashing eye (3) and
lift out of ski bag frame (4).

Installation:

First feed into ski bag frame (4).

RA  Removing and installing/replacing trunk wheel housing trim, left

BMW AG - TIS

11.02.2013  14:25

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Removing And Installing_replacing Trunk Wheel Housing Trim, Left|Page 2296 > < 3 RA Removing And Installing_replacing Luggage Compartment Floor Trim Panel