7 Series E38 740i (M60-2) SAL
Unfasten screws (1) and remove linings (2) and (3).
Installation:
Pull connecting plate (1) downwards and tighten down screws
(2).
Completely assemble folding table.
The folding table (1) can be adjusted upwards, downwards, forwards and backwards.
After adjusting the screws (2), tighten screws (4) down onto lining (3).
RA Removing and installing/replacing top rear panel on front seat backrest (luxury
BMW AG - TIS
11.02.2013 14:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -