7 Series E38 740i (M60-2) SAL
52 17 380
Removing and installing / replacing headrest
support on left or right front seat (comfort)
Removing headrest,
refer to 52 17 390
Remove bottom of rear panel
refer to 52 17 202
Remove top of cover from claw-type cover clips.
Version with multifunction headrest:
If necessary, remove connector.
Installation:
Check function.
The cable must not be under tension.
Pull off connectors.
Press cover and support upwards, unfasten screw (1) and pull
complete headrest support (2) with semi-circular shell section (3)
downwards to remove.
RA Removing and installing / replacing headrest support on left or right front seat
BMW AG - TIS
11.02.2013 14:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -