7 Series E38 740i (M60-2) SAL
If necessary, release screws (1) on stop (2) on left/right.
Installation:
Insert stop (2) correctly into floating roof liner (3).
Screw (1) is longer than the spring screws (see one work step
previously).
Tightening torque,
refer to Technical Data 54 12 8AZ.
Remove roof-lining frame forwards/upwards.
Installation:
Insert roof-lining frame (1) at rear/left into support (2) of
flexible lock.
RA Removing and installing/replacing roof-lining frame for glass sliding/tilting su
BMW AG - TIS
11.02.2013 15:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -