7 Series E38 740i (M60-2) SAL
61 13 ...
Front left wiring harness repair
Remove the driver's seat
refer to 52 13 000
Remove the left bottom panelling.
Loosen the screws and take out the cable cover.
Cut through the wiring harness exactly at the rubber grommet and
lay the wiring harness back into the footwell.
Lift up the kick-strip and lay the connector from the repair cable
under the kick-strip. Equip all cables from the main wiring harness
that are of similar colour with limit stop parts and pin them into the
supplied mating connector. Connect the connector to the mating
connector and lay in the footwell. Cut out and lay the kick-strip in
the area of the plug connection.
RA Front left wiring harness repair
BMW AG - TIS
11.02.2013 15:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -