7 Series E38 740i (M60-2) SAL
1)
ABS control unit
2)
Relay/Module
3)
Terminal connector
4)
Light module
5)
Connector plug
Lay the repair wiring
harness into the engine
compartment, connect and
feed into the passenger
compartment. Lay the
individual cable branches to
the control units, relays and
terminal connectors. (Note
the designations of the
cable branches).
Lift up the kick-strip and lay the connector (5) from the repair cable
under the kick-strip. Provide all cables of same color on main
wiring harness with stops and pin into mating connector. Connect
the connector (5) to the mating connector and lay in the footwell.
Cut out and lay the kick-strip in the area of the plug connection.
RA Repairing front right wiring harness
BMW AG - TIS
11.02.2013 15:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -