7 Series E38 740i (M60-2) SAL
Unfasten left and right screw.
Unclip finisher (rear oddments tray) over rear (1) and front (2)
apertures.
Remove screws (1 ... 3).
Separate connectors (4 and 5). Unlock receptacle housing (6) and
remove.
Note:
When dismantling the center console, do not damage the
wood.
Lift front of center console (7) forwards and remove.
Unfasten screws and pull wooden finisher on oddments tray
(center) forwards to remove.
Unfasten connector (1) (under wooden finisher) and pull connector
holder (2) of complete wiring harness backwards.
RA Removing and installing / replacing the rear fan completely
BMW AG - TIS
11.02.2013 16:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -