7 Series E38 740i (M60-2) SAL
65 71 040
Removing and installing or replacing Bowden
cable for cruise control
Remove end caps (1), release nuts (2). Remove covering for
cylinder head cover.
Installation:
Press Bowden cable with rubber grommet (3) into cutout on
cylinder head cover.
Apply full throttle at throttle lever and detach throttle control cable
(2) at throttle valve.
Installation:
Adjust Bowden cable.
Press together top and bottom clips and remove guide sleeve.
Detach throttle control cable at actuator motor.
RA Removing and installing or replacing Bowden cable for cruise control
BMW AG - TIS
11.02.2013 17:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -