7 Series E38 740i (M60-2) SAL
Install passenger airbag module but do not place on screw bolts
yet.
1 = Passenger airbag cover (airbag cover)
2 = Passenger airbag module
Installation:
Shown here with two retaining straps, same installation
location as with one retaining strap:
Retaining straps are on side turned away from passenger.
Insert plug in holder and lock.
Make sure plug is locked.
Place passenger airbag module on screw bolts.
1 = Passenger airbag cover (airbag cover)
2 = Passenger airbag module
Installation:
Shown here with two retaining straps, same installation
location as with one retaining strap:
Retaining straps are on side turned away from passenger.
Tighten nuts.
Installation:
Tightening Torque,
refer to Technical Data 72 12 9AZ.
Note:
Only one retaining strap is shown in this illustration.
RA Removing and installing or replacing airbag module on passenger side
BMW AG - TIS
11.02.2013 18:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -