7 Series E38 740i (M60-2) SAL
86 10 ...
Adjusting brake system
Proper adjustment of the brake system is only possible if
the brake Bowden cables and all brake system moving
parts move freely and are ready for operation.
The wheels must be completely fitted and able to rotate
freely. Always adjust both brake sides. The left and right
sides are adjusted in the same way.
Pull out overrunning equipment (1) fully in direction of arrow.
Reversing lever (1) must rest directly on innerlying tow tube of
overrunning brake.
Screw brake linkage (1) into nut (2) until distance (3) (nut (2) - end
of brake linkage (1)), is 10 - 15mm. Lock brake linkage (1) in
position with nut (4).
Check distance (3) and nuts (2, 4) with brake linkage installed.
RA Adjusting brake system
BMW AG - TIS
11.02.2013 18:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -