7 Series E38 740i (M62) SAL
area.
10. Secure the wiring harness taught and free from vibrations.
11. Reinstall the wheel housing trim and wheel.
12. Clear the fault memory.
13. Make a red mark next to the type plate in the engine compartment (right-hand side
panel).
Parts:
Description
Part number
Qty.
Foam support
16 11 1 181 918
1
Cable tie
61 13 1 377 134
2
Butt connector
0.2-0.5 dia.
61 13 8 353 746
as required
Butt connector
0.75-1.0 dia.
61 13 8 353 747
as required
Butt connector
1.5-2.5 dia.
61 13 8 353 748
as required
Shrink-fit tubing
0.2-5.0 dia.
61 13 1 379 833
as required
Insulating tape (33 mm)
83 19 9 407 798
1
Reimbursement:
Material and labour costs incurred can be claimed through the usual warranty channels
subject to current warranty terms.
Defect code
61 11 93 81 00
This defect code is not contained in the official
Defect Code Catalogue but has been included in
the system, thus enabling warranty claims to be
processed.
Within the scope of a visit to the workshop -
Check wiring harness, front right:
Job number
00 52 788
Labour
11 FRUs
Within the scope of a visit to the workshop -
Check/repair wiring harness, front right:
Job number
00 52 789
Labour
15 FRUs
In case of order without additional repairs
Check wiring harness, front right:
Job number
00 52 188
Labour
13 FRUs
In case of order without additional repairs
Check/repair wiring harness, front right:
Job number
00 52 189
Labour
16 FRUs
Warranty type
1
SI Various electrical faults in front section of vehicle E38
BMW AG - TIS
12.02.2013 12:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -