7 Series E38 740i (M62) SAL
Remove cooling air duct for alternator.
Remove alternator drive belt,
refer to 11 28 010.
Remove vane pump,
refer to 32 41 060.
Remove A/C compressor drive belt,
refer to 11 28 050.
Disconnect A/C compressor from mounting block and tie up to one
side.
Note:
Lines remain connected.
Unfasten ground tape from right of engine support.
Unfasten top left and right nuts on engine mount.
Unfasten coolant hoses from coolant manifold.
RA Removing and installing engine (M62)
BMW AG - TIS
12.02.2013 14:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
