7 Series E38 740i (M62) SAL
Note:
When unfastening screw connection on camshaft, brace
camshaft on hex head.
Caution!
Do not damage the cylinder head.
If necessary, machine open-end wrench accordingly.
Unfasten remaining three screws on exhaust and intake
camshafts on cylinder bank 1-4 approx. 1/2 a turn.
Remove piston for chain tensioner,
refer to 11 31 090.
Remove timing case cover, top left,
refer to 11 14 080.
Remove sprocket on left intake camshaft (cylinder bank 5-8).
Secure chain to prevent it from dropping.
RA Removing and installing left cylinder head (M62 up to 9/98)
BMW AG - TIS
12.02.2013 14:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
