7 Series E38 740i (M62) SAL
Note:
In TDC position of first cylinder, marker bores of camshafts
point upwards.
Fit special tool 11 2 446 / 442 to camshafts on cylinder bank
5-8.
Note:
In TDC position of first cylinder, marker bores of camshafts
point upwards.
Align all camshafts with open-end wrench in such a way that
special tools 11 2 445 / 441 / 446 / 442 fit on cylinder
heads with no gaps.
Caution!
Do not damage the cylinder head.
RA Removing and installing left cylinder head (M62 up to 9/98)
BMW AG - TIS
12.02.2013 14:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -
