7 Series E38 740i (M62) SAL
11 14 085
Removing and installing timing case cover,
top right (M62 VANOS from 9/98)
Disconnect plug connection to check valve.
Detach secondary-air line on timing case cover, top left and right.
Detach secondary-air line on bracket and remove.
Installation:
Clean sealing faces on cylinder head, replace sealing ring on
secondary-air line and apply a thin coat of grease as anti-
friction agent.
Unfasten top screw from dipstick tube.
Remove right cylinder head cover. These tasks are described in
the work step Removing and installing/sealing both cylinder head
covers,
refer to 11 12 004.
Remove piston for chain tensioner,
refer to 11 31 090.
Release screws on sealing flange.
RA Removing and installing timing case cover, top right (M62 VANOS from 9/98)
BMW AG - TIS
12.02.2013 14:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
