7 Series E38 740i (M62) SAL
11 23 031
Removing and installing/replacing hub for
vibration damper (M62)
Removing vibration damper,
refer to 11 23 010
Remove cooling air duct for alternator.
Remove brake air duct, left and right.
Release retainer for pressure line from engine support.
Pay attention to dowel pin.
Secure special tool 11 2 450.
Note:
Protect engine bracket from damage.
Insert wood between engine support and special
tool 11 2 450.
Unscrew central bolt.
RA Removing and installing/replacing hub for vibration damper (M62)
BMW AG - TIS
12.02.2013 14:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
