7 Series E38 740i (M62) SAL
11 24 571
Replacing all conrod bearings (M62)
(piston removed)
Caution!
Note grinding stages of crankshaft,
refer to Technical Data.
Install new conrod bearing shells.
Insert one red and one blue bearing shell for each conrod.
Install pistons,
refer to 11 25 530.
Check connecting-rod bearing clearance:
Piston in BDC position.
Fit special tool 00 2 590 (Plastigage Type PG 1) to the oil-free
crankshaft.
Place bearing caps in position, making sure that matching
numbers are paired.
RA Replacing all conrod bearings (M62)
BMW AG - TIS
12.02.2013 14:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
