7 Series E38 740i (M62) SAL
Unfasten remaining three screws on exhaust and inlet camshafts
on cylinder bank 5 to 8 approx. 1/2 a turn.
Remove piston for chain tensioner,
refer to 11 31 090.
Remove timing case cover, top right,
refer to 11 14 085.
Remove sprocket on right inlet camshaft (cylinder bank 1 to 4).
Secure chain to prevent it from dropping.
Crank engine counter-enginewise on central screw into 45
°
before
TDC position.
Note markings!
RA Replacing right camshaft (M62 up to 9/98)
BMW AG - TIS
12.02.2013 15:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -