7 Series E38 740i (M62) SAL
Attach special tool 11 7 380 to right cylinder head (cylinder
bank 1 to 4).
Install special tool 11 3 390 in special tool 11 7 380.
Tighten bow cover by turning the adjusting screw on the special
tool 11 3 390 with special tool 00 9 250 to 0.7 Nm.
Note:
If installation tolerance is unfavorable, attach special
tool 00 9 250 from underside.
Secure sprocket to inlet camshaft on cylinder bank 5 to 8.
Tightening Torque,
refer to Technical Data 11 31 3AZ.
Secure sprocket to inlet camshaft on cylinder bank 1 to 4.
Tightening Torque,
refer to Technical Data 11 31 3AZ.
RA Replacing timing chain (M62 up to 9/98)
BMW AG - TIS
12.02.2013 15:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -