7 Series E38 740i (M62) SAL
Version up to 9/98
Remove clip and slide engine vent tube forwards.
Installation:
Check/replace sealing ring.
Version from 9/98
Press sliding piece on vent pipe (1) forward until it is no longer
fixed to cover.
Version from 9/98
Keep vent pipe (1) pressed forward and lay towards bottom.
Version from 9/98
Installation:
Replace sealing ring (1) and coat with oil as anti-friction
agent. Make sure sealing ring is correctly seated and is not
crushed by vent pipe.
Feed vent pipe onto connection on cover.
RA Removing and installing intake air manifold (M62)
BMW AG - TIS
12.02.2013 15:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
