7 Series E38 740i (M62) SAL
Unfasten nuts (left and right). Remove decoupling elements and
lift intake air manifold upwards to remove.
If necessary, remove vent pipe in intake air manifold:
Remove throttle valve.
Remove covers at front and rear from intake air manifold.
Note:
Vent pipe is located with a lug (1) and locked with a retaining
lug (2) in intake air manifold.
Carefully press retaining lug (2) back and push vent pipe out of
bore.
Remove vent pipe (1).
Installation:
Replace seal.
Installation:
Insert vent pipe.
Check fixture (1) and lock (2) of vent pipe in intake air
manifold.
Replace seals.
Install covers at front and rear.
RA Removing and installing intake air manifold (M62)
BMW AG - TIS
12.02.2013 15:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
