7 Series E38 740i (M62) SAL
Remove retaining ring (1).
Unhook lever.
Disconnect plug connection (1).
Unfasten screws.
Installation:
Whenever the accelerator sensor (PWG) is disconnected, basic
adaptation of the accelerator sensor is required.
Procedure:
Select diagnosis of DME control unit.
For subsequent procedure, follow DIS instructions.
Installation:
Note installation position of pedal travel sensor.
Note lever position (1 and 2).
RA Removing and installing / replacing pedal travel sensor (M62)
BMW AG - TIS
12.02.2013 15:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
