7 Series E38 740i (M62) SAL
Remove vacuum hose from fuel pressure regulator.
Unfasten screw connection on injection tube.
Remove injection tube together with injector valves.
Unclip and remove circlip.
Remove injector valves.
Installation:
Check seals on injector valves and replace if necessary.
Before installing injector valves, coat seals with acid-free grease.
Check fuel injectors for leaks and clean,
refer to 13 63 582.
RA Replacing all injector valves (M60, M62)
BMW AG - TIS
12.02.2013 16:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -