7 Series E38 740i (M62) SAL
21 52 500
Removing and installing / replacing the clutch
master cylinder
Note:
After finishing the procedure, bleed the clutch hydraulics,
refer to 21 00 006.
Remove the brake fluid up to the supply hose of the clutch
hydraulics (1). For this purpose, use only a vacuum pipe that is
exclusively used for removing brake fluid.
Remove the supply hose (1) from the expansion tank.
Remove lower left trim panel from instrument panel.
Remove the retainer (1) and pull out the bolts.
RA Removing and installing / replacing the clutch master cylinder
BMW AG - TIS
12.02.2013 16:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -