7 Series E38 740i (M62) SAL
Remove heat shield on left front axle support.
Remove bracket for oil lines on engine oil pan.
Place oil container below.
Unfasten screw and remove oil lines.
Installation:
Replace O-rings.
Support transmission with special tool 00 2 030 / 24 0 170.
Unclip cable for oxygen sensors on transmission cross-member.
Unfasten screws and remove transmission crossmember.
Installation:
Tightening Torque,
refer to Technical Data 24 71 1AZ
RA Removing and installing automatic transmission (A5S 560Z)
BMW AG - TIS
12.02.2013 17:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
