7 Series E38 740i (M62) SAL
00 11 500
Checking/topping up fluid level in automatic
transmission (A5S 440Z)
Caution!
Use only the approved automatic transmission fluid in this
automatic transmission.
Failure to comply with this requirement will result in serious
damage to the automatic transmission!
1. Topping up transmission after a repair:
Move selector lever to "P" position.
Stand vehicle on a level surface and secure and rolling off.
Open filler plug (1).
Installation:
Replace sealing ring.
Top up transmission fluid until it emerges from filling orifice.
Start engine.
Replenish transmission fluid until it emerges from filling orifice.
Insert filler plug (1).
Tightening torque, 24 11 7AZ.
Press brake pedal to floor and shift through all gears several times
at idle speed.
Connect BMW Diagnosis and Information System (DIS) or BMW
MoDiC to vehicle.
Carry out fluid level check in accordance with instructions.
2. Checking fluid level:
Connect BMW Diagnosis and Information System (DIS) or BMW
MoDiC to vehicle.
Carry out fluid level check in accordance with instructions.
RA Checking/topping up fluid level in automatic transmission (A5S 440Z)
BMW AG - TIS
12.02.2013 17:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -