7 Series E38 740i (M62) SAL
Installation:
Press radial seal into transmission case with special tool
24 5 250.
Pull off special tool 24 5 490 from the manual shift valve
shaft.
Radial shaft seal on position switch:
Unfasten screws and remove heat shield.
Unscrew screw.
Remove position switch from manual shift valve shaft.
Remove radial seal with special tool 24 5 260.
RA Replacing radial seal on manual shift valve shaft (A5S 560Z)
BMW AG - TIS
12.02.2013 17:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
