7 Series E38 740i (M62) SAL
34 11 519
Removing and installing or replacing left or
right front brake caliper
Remove wheels.
Caution!
After completing tasks, bleed brake system.
Apply pedal prop and depress brake pedal slightly. This prevents
brake fluid from emerging from the expansion tank and air from
entering the brake system after the brake lines have been
detached.
Disconnect brake pipe from connection with brake hose.
Left:
Remove connector for wear indicator.
Installation:
Tighten brake hose on brake caliper.
Set steering to straight-ahead setting.
Screw down brake hose with brake line, do not twist brake
hose in so doing
Tightening torque, 34 32 1AZ .
RA Removing and installing or replacing left or right front brake caliper
BMW AG - TIS
12.02.2013 19:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -