7 Series E38 740i (M62) SAL
34 52 515
Replacing control module (ASC+T, DSC1, DSC2, DSC3) up to 09/98
Operation is identical to replacing control unit (for ABS),
refer to 34 52 510.
When replacing the control unit, the motor relay must also be replaced, as a pulse counter is integrated in the control
unit with a measured pulse count which cannot be transferred to the new control unit.
Adhere to following sequence when installing a new control module:
On cars with DSC, carry out adjustment of steering angle sensor with DIS under menu item "Service functions".
Carry out end-of-belt test with DIS under menu item "Test modules".
Read out fault memory, clear if necessary.
RA Replacing control module (ASC+T, DSC1, DSC2, DSC3) up to 09/98
BMW AG - TIS
12.02.2013 19:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -