7 Series E38 740i (M62) SAL
51 12 432
Replacing central body molding on rear
bumper
Lift out body molding at sides with special tool 00 9 321 (folding
strut) and lift backwards/upwards to remove from clips (1).
Version without Park Distance Control (PDC):
Remove body molding.
Version with Park Distance Control (PDC):
Release detents (1), pull off ultrasonic converter (2) with
connector and remove body molding.
Unclip and remove chrome finisher from body molding.
RA Replacing central body molding on rear bumper
BMW AG - TIS
12.02.2013 21:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
