7 Series E38 740i (M62) SAL
51 24 151
Removing and installing/replacing hydraulic
cylinder for trunk lid (electrohydraulic/fully
automatic)
Read information on automatic trunk lid controls
(electrohydraulic),
refer to 51 24 ...
If necessary, remove and install video module,
refer to 65 50 510.
Detach lines from hydraulic control unit,
refer to 51 24 150.
Unhook cable strap (1) for hydraulic hoses (2).
Installation:
Lay hydraulic hoses (2) parallel and without kinks to wiring
harness.
Release cable ties (1) and unhook cable straps (2). Detach
hydraulic hoses (3).
Installation:
Lay hydraulic hoses (3) parallel and without kinks to wiring
harness.
Turn seals (1) and remove hydraulic hoses (2).
Installation:
Lay hydraulic hoses (2) parallel and without kinks to wiring
harness.
RA Removing and installing/replacing hydraulic cylinder for trunk lid (electrohydra
BMW AG - TIS
12.02.2013 22:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -