7 Series E38 740i (M62) SAL
64 11 271
Replacing water valve for heater
Warning!
Danger of scalding!
Only perform this work after engine has cooled down.
M67 only:
Remove clean air duct.
Remove acoustic cover.
Release screws (1) on mounts (2).
Lay vacuum line (3) in direction of arrow to one side and if
necessary secure with cable tie.
Open Velcro-type fastener (4) and pull out insulation (5) in
direction of arrow.
Remove cable ties (1).
Open Velcro-type fastener (2) in direction of arrow.
Pull out lines (3) in direction of arrow and if necessary secure
with cable tie.
Unlock plug connection (1) and disconnect.
Release hose clamps (2) and detach water hose (3) completely.
RA Replacing water valve for heater
BMW AG - TIS
13.02.2013 01:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -