7 Series E38 740i (M62) SAL
65 11 055
Removing and installing/replacing radio
receiver (with board monitor)
The following parts must be removed first:
-
Video module,
refer to 65 11 070.
-
If necessary, HIFI amplifier,
refer to 65 12 070.
-
Bracket for video module and amplifier (HiFi)
-
Insulating mat on rear left side panel
Unfasten screws. Remove receiver with bracket.
Installation:
Use the correct screw length. Screws are 12 mm long and
have washers of (10 mm
∅
). All other screws are 14 mm
long and have washers of (15 mm
∅
).
Pull off connectors. Release screw and detach receiver from
bracket.
RA Removing and installing/replacing radio receiver (with board monitor)
BMW AG - TIS
13.02.2013 01:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -