7 Series E38 740i (M62) SAL
Remove clip (1).
Remove bracket (2).
Unfasten screw (3) and remove inertia reel units.
Installation:
Tightening Torque for screw (3),
refer to Technical Data 72 11 1AZ
Note encoding of inertia reel units on B-pillar.
Ensure Bowden cable is correctly seated in clip (1).
Unfasten (1) nut and remove D-ring from seatbelt height
adjustment unit.
Installation:
Tightening Torque,
refer to Technical Data 72 11 6AZ.
If necessary, remove seatbelt height adjuster: to do this,
disconnect Bowden cable and remove seatbelt height adjuster.
Installation:
Tightening Torque,
refer to Technical Data 72 11 2AZ.
RA Removing and installing or replacing front left or right safety belt (complete u
BMW AG - TIS
13.02.2013 02:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -