7 Series E38 740iL (M62) SAL
11 12 106
Removing and installing right cylinder head
(M62 VANOS from 9/98)
(cylinder bank 1 to 4)
Remove right exhaust manifold, refer to 11 62 065.
Unfasten drain plug for coolant on right engine block.
Drain and dispose of coolant.
Installation:
Replace sealing ring.
Tightening torque, refer to Technical Data 11 11 5AZ.
Top up coolant. Vent cooling system and check for leaks, refer to
17 00 005.
Remove both cylinder head covers, refer to 11 12 004.
Remove spark plugs, refer to 12 12 011.
Remove fan clutch with fan impeller, refer to 11 52 020.
Remove intake air manifold, refer to 11 61 050.
Remove coolant manifold, refer to 11 53 325.
Removal
Removal of cylinder head is described separately from installation.
Remove right camshaft adjustment unit, refer to 11 36 615.
RA Removing and installing right cylinder head (M62 VANOS from 9/98)
BMW AG - TIS
17.02.2013 15:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
