7 Series E38 740iL (M62) SAL
11 13 020
Removing and installing / replacing lower oil
pan section (M60/M62)
Unscrew and remove splash guard.
Open cover on main flow oil filter, engine oil returns to oil
sump. Open oil drain plug. Drain engine oil.
Unfasten plug connection on oil level switch.
Unfasten lower oil pan section.
Installation:
Clean sealing surfaces.
Install stud screws (1 and 2) at the locating points in the oil
pan.
Note:
The stud screws (1 and 2) secure the gasket and oil pan
during installation and prevent damage to the sealing lip.
RA Removing and installing / replacing lower oil pan section (M60/M62)
BMW AG - TIS
17.02.2013 15:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
