7 Series E38 740iL (M62) SAL
11 25 530
Removing and installing / replacing all
pistons (M62)
Special tools required:
•
11 2 470
•
11 9 500
(engine removed)
Removal
Removal of pistons is described separately from
installation. The assembly sequence for removal and
installation is different.
-
Remove both cylinder heads.
-
Remove upper oil sump section.
-
Remove oil pump.
Important!
Re-install piston, conrod and bearing shells back in the same
position and in the same installation location.
Conrod and conrod bearing cover are designated with same
pair number: do not interchange / confuse.
RA Removing and installing / replacing all pistons (M62)
BMW AG - TIS
17.02.2013 15:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
