7 Series E38 740iL (M62) SAL
Unfasten the accessible three screws on exhaust and inlet
camshafts on cylinder bank 1 to 4 approx. 1/2 a turn.
Unfasten the accessible three screws on exhaust and inlet
camshafts on cylinder bank 5 to 8 approx. 1/2 a turn.
Turn over engine once.
Caution!
Do not turn the engine back.
Secure crankshaft with special tool 11 2 300 in TDC
position of first cylinder.
Remove special tool 11 2 300 before switching on the engine.
Fit special tool 11 2 445 / 441 to camshafts on cylinder
bank 1 to 4.
RA Adjusting camshaft timing (M62 up to 9/98)
BMW AG - TIS
17.02.2013 15:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -