7 Series E38 740iL (M62) SAL
Remove special tool 11 2 300.
Remove special tools from camshafts.
Turn over engine once.
Tighten down remaining three screws on exhaust and inlet
camshafts on cylinder bank 1 to 4 firmly.
Tightening Torque,
refer to Technical Data 11 31 3AZ.
Tighten down remaining three screws on exhaust and inlet
camshafts on cylinder bank 5 to 8 firmly.
Tightening Torque,
refer to Technical Data 11 31 3AZ.
Install all oil lines to left and right cylinder heads.
RA Adjusting camshaft timing (M62 up to 9/98)
BMW AG - TIS
17.02.2013 15:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
