7 Series E38 740iL (M62) SAL
Move camshafts on cylinder bank 5 to 8 into installation position.
Rotate exhaust and intake camshafts with special
tool 11 3 430.
In insertion position (removal position), recesses in camshafts
point approx. 30 ... 40
°
downwards from the surface of the
cylinder head.
Evenly tighten down bearing covers on camshafts for cylinder
bank 5 to 8 in 1/2 turn steps from outside to inside.
Remove bearing covers and place to one side in orderly fashion.
Lift out camshafts.
Installation
The installation of the camshaft is described separately from the
removal. Assembly sequence for removal and installation is
different.
RA Replacing left camshaft (M62 up to 9/98)
BMW AG - TIS
17.02.2013 15:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -