7 Series E38 740iL (M62) SAL
Remove special tool 11 2 300.
Turn over engine once.
Tighten down remaining three screws on exhaust and intake
camshafts on cylinder bank 1-4 firmly.
Tightening Torque,
refer to Technical Data 11 31 3AZ.
Install all oil lines to left and right cylinder heads.
Loosen special tool 11 3 390 and remove.
Install chain tensioning piston,
refer to 11 31 090.
Install timing case cover, top left,
refer to 11 14 080.
Assemble engine.
RA Replacing left camshaft (M62 up to 9/98)
BMW AG - TIS
17.02.2013 15:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 11 -
