7 Series E38 740iL (M62) SAL
Installation
Installation of camshafts is described separately from removal.
Insert exhaust and inlet camshafts on cylinder bank 5 to 8.
Rotate exhaust camshaft until exhaust cam on cylinder 6 is
facing upwards.
Rotate inlet camshaft until inlet cam on cylinder 8 is facing
upwards.
Caution!
Do not mix up the camshaft bearing covers of
cylinders 1 to 4 and 5 to 8.
Fit bearing caps.
Exhaust camshaft bearing caps are marked A1 to A5 from inlet
side.
Inlet camshaft bearing caps are marked E1 to E5 from inlet side.
Tighten down bearing caps of camshafts on cylinder
bank 5 to 8 in 1/2 turn increments uniformly from inside to
outside.
Tightening torque, 11 31 1AZ
.
RA Replacing left camshafts (M62 VANOS from 9/98)
BMW AG - TIS
17.02.2013 15:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
