7 Series E38 740iL (M62) SAL
Note:
In firing TDC position, the inlet camshaft 1 to 4 rotates in the
teeth of the camshaft adjustment unit.
Caution!
This twisting is caused by the position of the cams and is not
an indication for incorrect timing.
Remove oil lines on left and right of cylinder head.
Remove vibration damper.
Slacken central screw of hub for vibration damper. This task is
described in the section "Removing and installing hub for vibration
damper".
Rotate engine at slackened central bolt in direction of rotation until
the first cylinder is in TDC firing position.
RA Replacing timing chain (M62 VANOS from 9/98)
BMW AG - TIS
17.02.2013 15:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -