7 Series E38 740iL (M62) SAL
Caution!
Do not damage the cylinder head.
If necessary, machine open-end wrench accordingly.
When tightening down camshaft screw connection: grip camshaft
at hexagon head.
Caution!
Left-hand threads.
Tighten down screw connection (2) of inlet camshaft on cylinder
bank 5 to 8.
Tightening torque, 11 36 14AZ
.
Caution!
Left-hand threads.
When tightening down camshaft screw connection: grip camshaft
at hexagon head.
Tighten down screw connection (1) of exhaust camshaft on
cylinder bank 5 to 8.
Tightening torque, 11 36 13AZ
.
Note:
The continuity test with the multimeter described in the following is
not possible on the M62 B46 because of the different design of
the camshaft adjustment unit.
The remaining procedure is identical.
RA Replacing timing chain (M62 VANOS from 9/98)
BMW AG - TIS
17.02.2013 15:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 17 -
