7 Series E38 740iL (M62) SAL
11 34 715
Replacing all valve springs (M62)
(cylinder head removed)
Preliminary tasks are described in disassembly and
assembly of cylinder head,
refer to 11 12 503.
Remove bucket tappet with special tool 11 3 250.
Installation:
Worn bucket tappets may only be reused in the same tappet
bore.
Arrange bucket tappets by cylinder and place on special
tool 11 3 030 in correct order.
Fit special tool 11 0 211 from below in special tool 11 1 065
and secure with special tool 11 1 045.
RA Replacing all valve springs (M62)
BMW AG - TIS
17.02.2013 15:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
