7 Series E38 740iL (M62) SAL
Note:
In firing TDC position, the inlet camshaft 1 to 4 rotates in the
teeth of the camshaft adjustment unit.
Caution!
This twisting is caused by the position of the cams and is not
an indication for incorrect timing.
Remove oil lines on left and right of cylinder head.
Turn engine in direction of rotation as far as TDC firing position of
first cylinder.
E38/E39
Secure crankshaft with special tool 11 2 300 in TDC firing
position of first cylinder.
Caution!
Remove special tool 11 2 300 before starting engine.
RA Adjusting camshaft timing (M62 VANOS from 9/98)
BMW AG - TIS
17.02.2013 15:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
