7 Series E38 740iL (M62) SAL
Note:
The sealing flange seals the timing case cover via the
solenoid valve.
If necessary, clean solenoid valve with a cloth.
Remove sealing flange (1).
Note:
Once it has been removed, oil drips from the solenoid valve.
Have a cleaning cloth ready.
Make sure no oil drips onto the belt drive. Remove any
remnants of oil immediately with cleaning cloth.
Release solenoid valve with special tool 11 6 420.
Installation:
Install solenoid valve (1).
Clean solenoid valve (1) and sealing face (2).
Installation:
Tighten down solenoid valve with special tool 11 6 420.
Tightening Torque,
refer to Technical Data 11 36 12AZ.
RA Removing and installing/replacing solenoid valve of camshaft adjustment unit, le
BMW AG - TIS
17.02.2013 15:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -