7 Series E38 740iL (M62) SAL
Attach special tool 11 6 440 to camshaft adjustment unit on
cylinder bank 1 to 4 and move at 40 Nm to left-hand stop.
Check left-hand stop of camshaft adjustment unit with acoustic
continuity test on multimeter.
Caution!
Left-hand threads.
When tightening down camshaft screw connection: grip camshaft
at hexagon head.
Tighten down screw connection (2) of inlet camshaft on cylinder
bank 1 to 4.
Tightening torque, 11 36 14AZ
.
Caution!
Left-hand threads.
When tightening down camshaft screw connection: grip camshaft
at hexagon head.
Tighten down screw connection (1) of exhaust camshaft on
cylinder bank 1 to 4.
Tightening torque, 11 36 13AZ
.
Attach sensor gear (2) to cylinder bank 1 to 4.
RA Removing and installing/replacing right camshaft adjustment unit (M62 VANOS from
BMW AG - TIS
17.02.2013 15:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 14 -
