7 Series E38 740iL (M62) SAL
Note:
Only screw (1) with sealing ring.
Replace sealing ring on screw (1).
Install and tighten down screws.
Feed timing chain onto camshaft adjustment unit distributor.
Insert solenoid valve and tighten down with special
tool 11 6 420.
Tightening Torque,
refer to Technical Data 11 36 12AZ.
Install right camshaft adjustment unit,
refer to 11 36 615.
Assemble engine.
RA Removing and installing/replacing distributor on right camshaft adjustment unit
BMW AG - TIS
17.02.2013 15:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
