7 Series E38 740iL (M62) SAL
12 14 525
Replacing sensor for cylinder recognition
(camshaft sensor) (M60, M62)
Interrogate fault memory of DME control unit.
Switch off ignition.
Version 1
(Acoustic cover screwed down)
Remove seal caps (1) and unfasten nuts (2).
Remove acoustic cover.
Version 2
(Acoustic cover with press-stud fastener)
Open press-studs (1 ... 4) one at a time, at the same time lifting
the acoustic cover slightly. Once all four press-studs have been
opened, remove the acoustic cover.
Installation:
Position acoustic cover and press downwards until press-
studs fasteners (1 ... 4) click audibly into place.
Disconnect plug-in connection (3).
RA Replacing sensor for cylinder recognition (camshaft sensor) (M60, M62)
BMW AG - TIS
17.02.2013 16:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -